Exploring Building Nymph Part 8
Exploring Building Nymph Part 8 reveals several interesting facts.
- Adding the bow and transom panels, and more on using bolts, washers, and nuts to hold the panel edges in alignment.
- Using a new tool to form the seam fillets.
- Fly Tying Ep.
- Using 2" and 3" tape on the interior seams.
- Wiring the side panels to the bottom panel, and drilling for the 1/4" bolts that hold the edges inline.
In-Depth Information on Building Nymph Part 8
Checking that the hull is level and square. Using cords at the corners, beam, and stern to bow top corners to hold the hull square. Sealing the seam edges with epoxy, and using System Three's GelMagic to "bind" the seams together into a hull. Then removing ... This is the first Follow along, and grab a pen and paper to take notes. You're gonna need some fluoro and that's it! Leave your tapered leaders in ...
More on wiring the hulls together, and laying out and cutting out the bow and transom panels.
Stay tuned for more updates related to Building Nymph Part 8.